There are a variety of problems you may encounter when trying to figure out the real problem with your garbage disposal. Perhaps the flywheel is not turning, you can only hear a humming sound, or no sound at all when switching it on. These are problems that you will be able to fix yourself with a few tricks and tips. Take into consideration, the cardinal rule of fixing a garbage disposal. You NEVER put your hands straight into the disposal hopper. Now so far, let’s decide what is wrong together with your disposal.
What if your garbage disposal won’t turn on. Check and ensure your disposal is plugged in. If it IS plugged in and it continues to doesn’t activate, try hitting the reset button and check if that works. Next step would be to check the circuit breaker and see if which has been tripped. If these don’t fix the issue, maybe you’ve a faulty switch or faulty disposal. Before you do anything, you will have to shut down the circuit breaker as well as the disposal and ensure the facility switch is in the off position. You may need to exchange the switch. Turn everything back on and see if this solves your problem.
Another common challenge with garbage disposals is that it is leaking. This can happen at many alternative zones of the rubbish disposal and you’ll need to assess in which the leak is coming out of before being allowed to go any further. The commonest areas where a leak may occur would be on the sink flange, the dishwasher connection or the sink drainpipe. In the event the sink flange is where the leak is, you will have to shut off the power to the garbage disposal, then put aside the disposal a little distance from mounting flange. Are your mounting bolts loose? If they’re, tighten them up. If the bolts are already tight, the problem could stem from faulty plumber’s putty. To examine this, you will need to loosen the bolts as well as lift the mounting flange a tiny bit above the sink. Putty might get dried and crackled and needs to be replaced. Place more putty connecting flange and to discover the sink, making sure you do that in an entire circle where they meet. Tighten the bolts backpedal and remove any putty that oozes out. Reinstall the disposal and turn everything back on. Check again for just about any leaks.
In the event the leak is run by the the dishwasher connection, you may need to tighten the clamp or exchange the hose. The other possible problem just might be drainpipe is leaking. Look into the bolts that hold the disposal to the dishwasher pipe. If this does not work you might need to remove the bolts and exchange the gasket. Once you have made that, your garbage disposal should not be leaking anymore. When the leak is present in the actual hose, you may have to exchange the hose to correct the problem.